Return to site

Windows 10: How to Fix Blue Screen Death Error?

Support For Blue Screen Error

Windows 10 is software just like its predecessors OS which need time to time update in order to work things out correctly. This is not surprising for such a complex piece of software, so in this piece of write-up you will get a complete guide that will help you get back up and run your Windows 10 PC accurately.

When you are upgrading to Windows 10 from Windows 8.1 or Windows 7, you may face blue screen death error BSOD. In general, this error code happens due to BIOS settings. In some cases, the error could be due to corrupt or damaged download of the installer. If you are not able to fix the issue then, you can simply take reliable support from a third party support proffering company that offers you customized support for blue screen error?

Blue Screen of Death while Booting Windows 10

There are mainly two things which are causing this issue while booting Windows 10. In the first scenario, you can access your desktop while in the second, the Blue Screen of Death won’t even let do work on your desktop and you are trapped within a loop of computer restarts. For this, you can take help from Windows 10 technical support for BSOD errors and the expert technicians help you in resolving the error subsequently.

The main reasons why BSOD appears are:

  • Some of the Windows are causing conflict or
  • Some Windows Update gone incorrect. If the latter is the reason, you have to eliminate and obstruct the update that caused Blue Screen of Update.

Consequently, the BSOD error message can be resolved in simple steps by just enabling UEFI Boot from the BIOS and disabling all other selection for the processor.

Read more How to fix the Windows blue screen errors?

Here is how you do it:

  • First of all, go to C drive : > Windows > Software Distribution > Download and delete all the files stored in this folder.
  • As the Windows Update method seems to be a bit disordered due to inherent bugs in the OS, it is advisable to try performing a clean install of Windows 10 by downloading the ISO files from Microsoft's official website. After downloading the ISO file, you need to create a bootable installation media via Microsoft's Media Creation tool.
  • You can proceed further by correcting a few settings in the BIOS menu once you have prepared the bootable USB drive or DVD.
  • Restart your computer and once the display appears, quickly click the F12 or Delete key to up the BIOS menu.
  • Switch off all options for your processor, if you have set it higher than default values.
  • Turn on UEFI Boot from the BIOS, which can be found the Boot section of the BIOS screen.
  • Just reboot the PC via installation media you created earlier and the Windows 10 upgrade should complete without any hassles.

For further details visit the Microsoft Windows official website and get more relevant solutions.


All Posts

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OKSubscriptions powered by Strikingly